[Lyra Delos]

Lyra Delos

상품 옵션
판매가격
전화문의
원산지
일본
제조사
Lyra
브랜드
Lyra
수량
수량증가 수량감소

Lyra Delos( mc) 기본형

 

DELOS-v2

While vinyl records played back with an MC cartridge can sound exceptionally good, it is a surprising fact that the design of conventional MCs restricts the sound quality that can be achieved from LPs.

An essential factor for proper operation of an MC cartridge is the angle between the magnetic circuit, signal coils and core. Performance is optimal when the angles are all aligned, but any significant difference in the angles will cause the formation of a strong and directional flux that will flow constantly from the magnetic circuit into the signal core. This directional magnetic flux will orient the core toward a specific direction and make it impossible for the core to move with equal ease in all directions, which is necessary for proper cartridge performance.

Unfortunately, conventional MC cartridges have been designed so that the angles between magnetic circuit, signal coils and core become aligned only when tracking force is not applied. The result is that during playback, the required tracking force causes the angle between magnetic circuit, signal coils and core to become misaligned. This limits the cartridge’s resolution, tracking ability and dynamic range.

The new Lyra Delos is designed to conquer this problem. Compared to conventional cartridges, the Delos has a new body structure with an unusually shallow angle, and this has been paired with a unique asymmetrical damping system. When no tracking force is applied, the shape of the asymmetrical dampers forces the signal coils and core into a more upright angle than the magnetic circuit.

However, no tracking force applied means that the cartridge is not operating, and therefore any angular discrepancies between magnetic circuit, signal coils and core will have no effect on performance. When tracking force is applied, however, the force of the stylus pushing on the LP causes the asymmetrical dampers to be deformed into a symmetrical shape, and when this happens the angular discrepancies between magnetic circuit, signal coils and core all disappear. Since tracking force applied means that the cartridge is now operating, it should be clear that the design of the Delos is able to keep the angles between the magnetic circuit, signal coils and core aligned during playback.

Keeping the proper angular alignment prevents the formation of any strong and directional flux that could otherwise flow constantly from the magnetic circuit into the signal core, and enables the Delos’ core to move with equal ease in all directions, for optimal performance.

The Delos also has a microridge stylus on a boron cantilever for outstanding tracking, a non-parallel solid machined metal body for low resonances, and 6-N high-purity copper coils and nude construction for greater clarity. The result is clearly improved sound quality, particularly resolution, tracking ability, dynamic range, transient impact and immediacy.

Feel free to audition the Lyra Delos, and hear how good a New Angle can make your LPs sound.

Specifications:

  • Designer: Jonathan Carr
  • Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)
  • Type: Medium weight, medium compliance, low-impedance moving coil cartridge
  • Stylus: Namiki microridge line-contact nude diamond stylus (2.5um x 75um), surface-mounted
  • Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
  • Coils: 3-layer deep, 6N high-purity copper, square-shaped high-purity iron former, 6.3ohm self-impedance, 9.5uH inductance
  • Output voltage: 0.6mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
  • Frequency range: 10Hz ~ 50kHz
  • Channel separation: 30dB or better at 1kHz
  • Compliance: Approx. 12 x 10cm/dyne at 100Hz
  • Vertical tracking angle: 20 degrees
  • Cartridge body: One-piece machining from solid 6063 aluminum billet, partially non-parallel shaping, body threaded directly for mounting screws
  • Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard
  • Distance from mounting holes to stylus tip: 9.5mm
  • Cartridge weight (without stylus cover): 7.3g
  • Recommended tracking force: 1.7g – 1.8g (1.75g preferred)
  • Recommended load directly into MC phono input: 97.6ohm ~ 806ohm (determine by listening, or follow detailed guidelines in instruction manual)
  • Recommended load via step-up transformer: 5 ~ 15ohm (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
  • Recommended tonearms:High-quality pivoted or linear (tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment
 
배송은 주문 당일 배송을 원칙으로 하며 받으실 때까지 약 2-3일 정도 소요됩니다. (도서 산간지역 3-4일 소요)
•제품 수급에 의해 지연이 되는 경우 별도의 연락을 드린 후 배송을 하여 드립니다.
_ 전 제품 5만원 초과 상품은 배송비가 무료입니다.
(중고/전시품란의 일부상품 제외. 5만원 이하 상품은 3,000원의 배송비가 추가됩니다. )
_ 전제품 품질보증서가 들어있는 정식 수입원 제품입니다.
(일부 상품은 정식 수입품이지만 시리얼넘버로 정품관리를 하기 때문에 보증서가 들어있지 않을 수도 있습니다.)
_ 제품을 설치하였거나 개봉후에는 반품 및 교환이 불가능합니다.
_ 제품 자체에 결함이 있을 경우 100% 교환 및 환불이 가능합니다.
_ 이벤트(경매, 중고/전시품 판매, 특가&이벤트판매 등)를 통해 구매하신 제품은 제품의 결함 외에는 환불 및 교환이 불가능합니다.
_ 특별할인판매 및 기타 이벤트 판매의 경우 현금 주문은 24시간 이내에 입금되지 않으면 주문은 자동취소됩니다.
제품 개봉 및 설치를 하셨을 경우에는 공정거래위원회 표준약관 제15조 2항에 의거하여 교환 및 반품/환불이 불가능합니다.
• 전시품, 위탁제품, 중고제품의 경우 반품 및 환불이 불가능 합니다
 
review 리스트
번호
제목
작성자
작성일
조회
등록된 리뷰가 없습니다.
review 작성 폼
review board
이 름 :
평점 :      
내 용 :
review 리스트
이름
내용
평점
날짜
QnA 리스트
번호
제목
작성자
작성일
조회
등록된 문의가 없습니다.
비밀번호 확인 닫기